Skytrak 6036 Service Manual Bedienungsanleitung PDF herunterladen (Seite 203)

7.25

Model 6036 Legacy

Engine: Cummins 4BT3.9

7.10.2 Air Cleaner Assembly Installation

Note: Apply Loctite

242 threadlock to the hex-head

capscrew threads before installation.

1. Install the air cleaner mounting bracket (Fig. 7-27, 7)

and air cleaner assembly (4) using two hex-head

capscrews (5) and lockwashers (6).

2. Place the loosened T-bolt clamps (Fig. 7-27, 1 and

2) over the air intake hose (3), and install hose on

the air cleaner assembly (4) and engine intake.

Tighten T-bolt clamps.

7.11 ENGINE REPLACEMENT

7.11.1 Engine Removal

Note: The engine, radiator and oil cooler can be removed

from the vehicle as one unit. If replacing the engine,

disconnect the hydraulic hoses and remove complete

unit; then remove radiator, mounting brackets and

external engine components for transfer to new engine.

1. Level the vehicle, ground the attachment, place the

travel select lever in NEUTRAL (N), engage the

parking brake switch and shut off the engine.

2. Secure accident prevention tags to the steering

wheel and ignition key switch. (Refer to Section 1.5,

“Accident Prevention Tag Usage.”) Allow the engine,

cooling system and hydraulic system to cool.

3. Label and disconnect the negative (-) battery ground

cable (Fig. 7-28, 1).

Figure 7-28 Battery Removal

4. Label and disconnect the positive (+) cable

(Fig. 7-28, 2) at the battery (3).

5. Remove two battery hold-down screws and washers

(Fig. 7-29, 1) (right side shown) and hold-down (2)

from battery (3). Remove battery from vehicle. Store

battery in a cool and dry area.

Figure 7-29 Battery Hold-down and

Back-up Alarm Location

6. Disconnect and remove the ground cable (Fig. 7-28,

5) at frame connection.

7. Remove the rear engine compartment door with the

help of at least one assistant. (Refer to Section

4.7.1, “Access Panel and Cover Replacement.”)

WARNING: To avoid severe burns, DO

NOT attempt to remove the engine when the

engine, cooling system and hydraulic system

are hot. Wait until all parts and systems are

cool before proceeding.

MA8410

MA7970

1 2 ... 198 199 200 201 202 203 204 205 206 207 208 ... 459 460

Kommentare zu diesen Handbüchern

Keine Kommentare

Skytrak 6036 Service Manual Bedienungsanleitung Seite 203

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Spezialmaschinen Skytrak 6036 Service Manual