Skytrak 6036 Service Manual Bedienungsanleitung PDF herunterladen (Seite 217)

9-29

6036, 6042, 8042, 10042, 10054

Electrical System

9.12.2 Dash Switches

a. Switch Removal

1. Park the machine on a firm, level surface, level the

machine, fully retract the boom, lower the boom,

place the transmission control lever in

(N) NEUTRAL, engage the park brake and shut the

engine OFF.

2. Place a Do Not Operate Tag on both the ignition key

switch and the steering wheel, stating that the

machine should not be operated.

3. Open the rear door. Allow the system fluids to cool.

4. Properly disconnect the battery.

5. Carefully pry the switch and wiring (7) out of the

mounting plate (8).

6. Label and disconnect the wiring from the switch.

Remove the switch.

b. Disassembly

DO NOT disassemble the dash switch. Replace a

defective switch with a new part.

c. Inspection and Replacement

Inspect the switch terminals for continuity and shorting in

both the engaged and disengaged positions. Replace a

defective or faulty switch with a new switch.

d. Switch Installation

1. Connect the switch to the cab harness connector.

2. Position the switch over the rectangular switch bezel

and snap into position.

3. Properly connect the battery.

4. Remove the Do Not Operate Tags from both the

ignition key switch and the steering wheel.

5. Start the machine and check the replaced switch for

proper function.

6. Close and secure the rear door.

MAQ0770

1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 275 276

Keine Kommentare

Skytrak 6036 Service Manual Bedienungsanleitung Seite 217